+2 antivibe stem with low rise 1-1/8" bars ???

[Awk08]

thinking of getting the burgard +2 stem with antivibe clamp and a set of 1-1/8" bars, but what height and bend will work best to get me close to my current bar set-up ?????
anyone have any experience or thoughts on this combo ???
will it put my bar height close to my stock stem with +1 risers and renthal race (mid/high) bend bars ???

 

[stabor1122]

CR high or Outdoor bends are usually the tallest. You will probably want to trim the width though.

 

[Awk08]

so where will the cr high bends put me with the +2 stem, i really don't wanna end up more than a 1/2" higher than i am now

 

[stabor1122]

How tall are your current bars?

 

[stabor1122]

Here's a chart for ProTapers. Most of the manufacturers sizes vary a little but are close.

 

[Awk08]

my current bars are on 1" risers and are renthal race bends, but seem almost as high as stock bars, the crossbar is high enuf to not interfere with my key
and i'm about 5'8", standing up now, they could be a 1/2" higher for me to not have to bend at all, pretty close to perfect for me, i guess i could measure the rise of them tomorrow

 

[slickerthanyou]

I can see it now "Chopper AWK"!

You could always sit on a telephone book shorty ....HAAAAAAA. J/K bro.

You trying to build a cadillac model? You can't go any faster than full throttle , and you do that now you physco!!!

I'll see ya with the family tomorrow late afternoon, I'll call ya first!

 

[Awk08]

heres what i'm lookin at for bars................

NEW JUMBO ATV MX HANDLEBAR BLACK 1 1/8 11/8 FAT BAR - eBay (item 130488828475 end time Mar-21-11 12:51:53 PDT)

Trail Tech X-Bars 1 1/8" ATV High Handlebars Titanium - eBay (item 380320669671 end time Mar-30-11 11:37:40 PDT)

Zeta SX ATV 1-1/8 Handlebars Handle Bar Bars 1 1/8" - eBay (item 230595180316 end time Mar-11-11 23:14:51 PST)


both say high bend, just wonderin will that be too much with a +2 stem ???

 

[stabor1122]

Stock is 775mm wide, 150mm high, 120mm rise, 100mm pullback according to Renthal website.

CR high- 95mm high + 2" stem (52mm)= 147mm - just slightly lower than stock with no risers.

 

[stabor1122]

Th freestyle bend on that last one might work for you too.

 

[Awk08]

i do see that one says a bunch of different bends, maybe a phone call is in order,
or burgard can steer me straight when i order the stem in the next week or so
new frame will be ready to roll this weekend sometime, tater got my T-ROCK swinger PC'd and doin my lower asr arms over the weekend, re-build thread comin soon, with tons of pics, as soon as i get my cable modem in on tuesday, i told AT&T to shove this "air card" up their ass, i can't even upload pics it's gotten so slow
i ripped them a new a-hole, got the early cancellation fee and this month's fee waived, or i was takin my 3 phones elsewhere, hahahaaaaa

 

[stabor1122]

lol. Funny what ya can get done when ya have 3 phone lines with one company. We have had to pull that card a time or two in the past. Not a bad idea to get their input. I had outdoor bars on my RM they were a little taller but I like my bars a little taller usually.

 

[slickerthanyou]

bob........maybe i'll do some "ape hangers" for busco, hahahaaaaa

and by afternoon i should be at my garage, headin to randy's garage to lay on the final coats of frame paint in the morn, holler when your close

Cool, Probably about 3-4pm. Stoppin at chevy's house to wish him a happy-b day and go for a rip or two, Then I'm comming to the mountain!

 

[BlasterGuy87]

Well I'm riding a CRF bend but the Cr High bend and Atv med is good. you want more of an atv bend though if you want longer bars.

 

[Awk08]

thanx for ther input guys !!!!!!!!!!!!!!

 

[Roostinshee]

Back when I was heavily involved in racing atv mx I used Tag T-2 ATV TRX bend bars. They were by far the best bar I EVER bought. I'm alittle one sided on them, but I even like them better then the high dollar flexx bar set-up a friend has on his 450r. CR-Hi or Renthal TRX400ex bend (fatbars) work good too. Just wanted to chime in, haha. Here's the thing tho, the T-2 wouldn't even be scratched in a wreck. The stem however was bent in the bad wrecks I had. They have a really neat sorta natural curve in the grip area, and are slightly lengthier than the Fatbars and Pro-Tapers. (updated)- On Tags website here's the current bends they are available in, trying to find a chart. I emailed Tag, I'll post first sign of response.
CR HI/KTM/ATV/YFZ/KFX

 

[DUALSTROKE]

Bro I run the burgard +2 anti vibe stem also on my bike but I run 7/8 bars.Give me a holla later and I will go take a look and let you know what bars I am running.Almost same bend and pullback as stock bars but a little narrower.

 

[Awk08]

Bro I run the burgard +2 anti vibe stem also on my bike but I run 7/8 bars.Give me a holla later and I will go take a look and let you know what bars I am running.Almost same bend and pullback as stock bars but a little narrower.

i wanna go fat bars this round, with no crossbar