So I bought a 1995 Blaster about 3 years ago for $500 with a bad crank. The kid that sold it to me had already purchased a hot rods crank, weisco piston, and a full gasket kit that he gave to me with the quad. It sat in my garage for about 2 years and I finally decided to start working on it. I had the jug bored .50mm over and rebuild the motor. Then it sat in the garage until today when i got another chance to work on it. I cleaned the carb and drilled it out for the Motion pro idle kit. I put on the cr pro twist throttle and fired it up. As you can see I still have a lot of work to do.
