1990 blaster not pulling gas

[Bastravia]

My blaster isn't pulling gas to the carb the carb has brand new jets and all new gaskets I've tried just about everything I'm very stumped on this whole issue any help will be appreciated.

 

[Blaaster]

Please be a little more specific, is it that no fuel flows from the tank, no fuel fills the bowl, or it runs but not properly.

 

[Bastravia]

It's not pulling gas from the tank to the carb also it ran fine for about a month then just stopped pulling gas from the tank to the bowl if you take the hose from the tank off it is flowing fine just not when it is connected to the carb

 

[Blaaster]

The needle and seat assembly may be blocked, not installed correctly to the float, or somehow the float level setting has been changed.

If the float was slightly bent in assembly it could be jamming agaist the bowl, stopping it falling.

 

[Bastravia]

Let me take the carb out and look at it also when it was running it was leaking gas same issue with the needle and seat?

 

[Larry's Shee]

Make sure vent to tank and vents on carb aren't plugged. Set float level. Check DIY for almost free leaky carb fix.