1987 Yamaha Warrior Build

[Ba9801]

My friend has had a Dura Blue Eliminator X-33 Pin Drive on his warrior for years now without any problems. It looks like a very nice part.
My only options for axles seam to be Dura Blue or G-Force. Looks like no one else makes an axle for a Warrior.
What are the advantages of the G-Force axle over the Dura Blue?

 

[hvpunk62]

warrenty stainless steel i believe so basically its cheaper,looks better quality just as good

 

[Cochise]

My friend has had a Dura Blue Eliminator X-33 Pin Drive on his warrior for years now without any problems. It looks like a very nice part.
My only options for axles seam to be Dura Blue or G-Force. Looks like no one else makes an axle for a Warrior.
What are the advantages of the G-Force axle over the Dura Blue?

DuraBlue will only replace your axle ONE TIME!!!! Then you have to pay $250 each time after that. G Force (rockymountain) will replace it and all the individual parts as many times as needed. Forever.

 

[redranger]

looks sweet man! Try plastic cleaner for a even better looking bike!

 

[Busted Warrior]

What year yz250 did you get that shifter from? Also where exactly did you bend it? I've been wanting to do this to my warrior forever.
thanks
justin

 

[dc5dave]

nice warrior man! hey how do you like the dvx? i saw one for sale for $1,600 and i'm thinking about buying it

 

[Ba9801]

The shifter should fit from 88-2009 yz250 I think. If you dont have the recoil pull start you wont need to bend it at all. With the recoil pull starter I straightened the complete shifter and bent it where I needed it at both ends. It had a nice angle to it originally and looked and fit great without the recoil starter on. The recoil starter adds at least 1 1/2" to the side case which is why I had to re bend it to clear. The recoil pull starts only came on the 87-89 warriors though unless you added one. My recoil starter is actuall a brand new one from a 00-05 Yamaha Wolverine.