Looking for 10x10 or 10x8 Aluminum Rear Wheels with 4/115 Banshee/Raptor/YFZ pattern. Don't have to be new but good shape. Let me know what you have.
10" Aluminum Rear Wheels
- Thread starter stabor1122
- Start date
- Status
dude, i've been debating selling these 10 inch itps i have, cause i just luv the pure sport bandits i have on them
but the rims only .125's and not strong enuf for around here, the one bent once and left the air out, but easily pounded back in with a rubber mallet and holds air now, but i do have 6 ply bandits on them, i think the 6 ply's are stonger than the rim, cause i didnt hit anything with the rim when it bent
im sure they have some dings in them too
if where you ride isnt insanely rocky, they may work for you ????
but they're blaster bolt pattern, but i have a set of good hubs to go with them,
what i do is have 2 sets of wheels, one blaster bolts, one banshee bolts, it is alot easier to just undo the hub nuts and leave it hooked to the rim, than undoing all the lug nuts
lemme know if you think slightly beat .125 thickness rims will work for ya ???????
then we'll talk about price
pic when they were new (to me)
but the rims only .125's and not strong enuf for around here, the one bent once and left the air out, but easily pounded back in with a rubber mallet and holds air now, but i do have 6 ply bandits on them, i think the 6 ply's are stonger than the rim, cause i didnt hit anything with the rim when it bent
im sure they have some dings in them too
if where you ride isnt insanely rocky, they may work for you ????
but they're blaster bolt pattern, but i have a set of good hubs to go with them,
what i do is have 2 sets of wheels, one blaster bolts, one banshee bolts, it is alot easier to just undo the hub nuts and leave it hooked to the rim, than undoing all the lug nuts
lemme know if you think slightly beat .125 thickness rims will work for ya ???????
then we'll talk about price
pic when they were new (to me)
Well I have 2 sets of Blaster hubs and a set of YFZ hubs so I could trade those out if I needed to. I also have a good set of Carlisle Badlands on alum rims right now but one has a bent lip that I though about trying to straighten but the other one some dumbass left the lugs loose at some point and the holes in the rim are no longer round so I am just looking for new rims to mount the tires to. Its not real rocky around here so they might work. May be interested if the price was right. Just PM and I'll let you know.
they made a 10" banshee rim, or are they A/M ????
if they are thick and tough, i may be interested in your "stash" as well
i need sumthin that doesn't cost a fortune for these 6 ply kevlar belted bandits,< best, toughest, longest lasting tires on the planet !!!
with only a half of season on them, years of life left if someone knows of a good 10" rim for them, maybe with the rolled lip ????
suggestions welcome ???
Shee if you want the rims and tires I let you have them both for 75 and I'll just get some new tires for my 8's. Let me know and I can send ya some pics. The tires are Carlisle's version of the Holeshot (Carlisle makes ITP) 18x11-10.
By the way these are 4/100 Blaster pattern not 4/115 but shouldnt be a big deal if you think you can redrill them.
remember a few threads back about the aluminum rims i had the are like the ones u have but there 10s and i was going to redrill them and the hubs and put in car studs i think that would turn out great and maybe u could do that to ursi:i
Actually I forgot that this thread was still open. I sold the rims/tires last weekend and bought tires for my Bajas but thanks.
- Status
