03 blaster won't start???

My blaster has 130psi excellent spark and has gas to carb. I can't get it to start without pouring gas in cylinder. And even if I start it that way it bogs out when I gas it. Carb has been cleaned and new jets, floats are set. The blaster is all stock. Any help would be awesome as I don't know what else I can do to fix it.
 
My blaster has 130psi excellent spark and has to carb. I can't get it to start without pouring gas in cylinder. And even if I start it that way it bogs out when I gas it. Carb has been cleaned and new jets, floats are set. The blaster is all stock. Any help would be awesome as I don't know what else I can do to fix it.
Also put new boyson reeds yesterday and did not fix.
 
Firstly lay off pouring fuel into the cylinder, it washes lubrication from the cylinder walls.

Next take the carb off and clean it again.

Then if it still will not start, do a leak test to see if you are airtight.
 
Firstly lay off pouring fuel into the cylinder, it washes lubrication from the cylinder walls.

Next take the carb off and clean it again.

Then if it still will not start, do a leak test to see if you are airtight.
Carb has been cleaned and all new parts. Going to try leak down test in a bit.
 
  • Like
Reactions: Blaaster