'03 Blaster stock... to?

[Blasterdude27]

Everything on it is either "cheap" or stock. Has an fmf pipe and looks to be 3 setting springs (no name brand?)

Do the shocks look like these by any chance?

Works Performance A-T Steeler Front Shocks w/Dual-Rate Springs - DennisKirk.com

 

[2strokepower]

Bingo! don't waste your money!!!

exactly you all ready have an fmf and its the same thing as a pro circuit, its either a dynoport, lrd, or f7.

 

[ROCKSTAR]

post a picture of your quad, maybe we can help ypu figure out what you have for suspension....

for rear run a banshee axle and 400ex or trx250r shock. for fronts aftermarket shocks and +2+1 arms.....you can get a nice used set of arms for cheap, just gotta look....doing things on a budget is easy, just be patient and keep looking around...it will pop up. 2k is a lot of money...you can do a lot with 2k....

 

[Alaskanblaster]

Do the shocks look like these by any chance?

Works Performance A-T Steeler Front Shocks w/Dual-Rate Springs - DennisKirk.com

Just like that, but with shock covers on them.

 

[Alaskanblaster]

Yeah its a few miles from fairbanks. Hit me up if your ever up here.
I don't race either, but the shocks and narrow width really hold it back.. Why be able to do 75 only in a stright line? I'd rater go 75 and go through the bumps and leave everyone else behind Thats just me though I'm not the one riding the bike, you are.
I think if your going to spend 80 and hour for the work talk to the builders here and order a big bore kit, and have them port it to your riding style.. in the long run its more bang for your buck.

That's the thing though, I don't want a big bore kit. I don't want to lose reliability and I definately don't want to tear into the motor again after I have once already.

 

[Alaskanblaster]

post a picture of your quad, maybe we can help ypu figure out what you have for suspension....

I can't post a picture of my blaster cause I'm at work, away from home. I get home Friday. I'll post one then.

As far as pictures go though, I have one, but I'd have to text it to you if you want it. Just PM me and ask for me to text it to you...

 

[Alaskanblaster]

And can I just put spacers to be wider? Or is there an advantage to having a banshee axle?

 

[2strokepower]

And can I just put spacers to be wider? Or is there an advantage to having a banshee axle?

spacers arent reliable when jumping, i wouldent use them.

 

[lasxgames]

Yamaha Blaster
Blaster Tech Tips
The Truth About Oil Injection
How to Remove TORS
Oil Injection Blockoff
400EX Rear Shock Installation
Z400 Rear Shock Installation
Increase Timing 4 Degrees
How to Clean Carb
Jetting Guidelines
How to Rejet Carb
How To Install 250r Airbox on Blaster
Crankseal Diagnosis & Repair
How to Rebuild Topend
Blaster Rear Brake Fix

 

[Alaskanblaster]

So after a port job and head work... What do I need to do to ensure that it's going to work? I was told the exhaust or something will be higher and intake will be lower or something like that...
Anyone know?