03 blaster axle ?
- Thread starter Tim King
- Start date
Only axles that will fit from a blaster will be from 03-06.The 88-02 models are different.However you can get a banshee axle and it is a direct swap for you.A shee axle makes it 1 1/2 inches wider per side.All you would need would be the shee axle.Good luck.
Only reason you will need bearings is if yours are bad.Otherwise the bearings for the shee and the 03-06 are the same.Not sure on a warrior axle wether it fits or not.
The warrior axle is a negative sorry. As for fitting a 2000 I think you need a bearing carrier too.
He has a 2003 blasty.The carrier dimensions are the same with all years of the blasty.It's just the 03-06 has the hydro mount on it.
you will also need the banshee brake hub i run into that problem along with others, but yes other than that it works makes it 2 3/4 inches wider pretty nice. Also raptor 660 axles work but not the 700's they are also the same length as the banshee's.
He will not need a brake hub as the 03-06 come with the same exact one as the shees.Basically the 03-06 is the same as the shee setup just the axle is not as long.Also it is 3 1/2 inches longer overall.It is 1 3/4 per side.I have heard that the 660's axle is longer but not as long as the banshees axle.
^ No they aint. The banshee is 2 inches wider and it actually fits. I just had a raptor 660axle and it did not fit properly, the sproket hub did not line up.
