Yamaha Warrior Clutch

[BGATZ]

before putting handle bars on the clutch wasn't slipping. after we put msr bars on the clutch started slipping. which adjustments do i need to make to make it not slip anymore ? thanks for the help

 

[Blaaster]

You may need to loosen out the cable and give it a little slack.

Did you install the cable back by the same route as when you took it off?

 

[BGATZ]

Cable is in the original route. If we back the screw out it slips. When all the way in it slips a little bit. Can we move the clutch lever assembly closer to the right. Would that help ?

 

[Blaaster]

Cable is in the original route. If we back the screw out it slips. When all the way in it slips a little bit. Can we move the clutch lever assembly closer to the right. Would that help ?

Could be worth a try!

 

[Larry's Shee]

Make sure cable end is seated in the clutch arm comepletely.