Selling a Yamaha Blaster. Its in rough shape. It does NOT run. It does NOT have a title.
Description:
pre -'03 Yamaha Blaster (drum brakes front, mechanical disc rear). The frame is bent right after the lower a-arm mount, on the clutch side. Its a good .5" pinch. Yes the frame has rust.
The motor is stock. Its from another Blaster (blew up) I purchased for just the frame. The piston skirt fell apart and some pieces are in the bottom end of the motor. The crank spins free but show some water droplets on it. The jug is on a stock bore, has scratches in the cylinder walls, and is missing studs for the head. The clutch discs, stator, and flywheel were removed and are included along with both side covers. The oil pump and chain were removed and not included. The carb, tors, and throttle cable are there, missing is the thumb throttle. In the rear, the mechanical disc brake caliper is there, but missing the cable. Tires in the rear have good tread, with minimal plugs. The front tires have minimal tread, but look to be without plugs. The electronics look to be all there. The quad is missing misc screws and bolts.
I could just keep the motor and sell the chassis as a roller, but I have enough spare motors the way it is.
Looking for best offer on this or stuff you might have. Looking for around $150-200
Located close to I-81 and 45min from I-78. Zip is 17970 (st.clair, pa)
Description:
pre -'03 Yamaha Blaster (drum brakes front, mechanical disc rear). The frame is bent right after the lower a-arm mount, on the clutch side. Its a good .5" pinch. Yes the frame has rust.
The motor is stock. Its from another Blaster (blew up) I purchased for just the frame. The piston skirt fell apart and some pieces are in the bottom end of the motor. The crank spins free but show some water droplets on it. The jug is on a stock bore, has scratches in the cylinder walls, and is missing studs for the head. The clutch discs, stator, and flywheel were removed and are included along with both side covers. The oil pump and chain were removed and not included. The carb, tors, and throttle cable are there, missing is the thumb throttle. In the rear, the mechanical disc brake caliper is there, but missing the cable. Tires in the rear have good tread, with minimal plugs. The front tires have minimal tread, but look to be without plugs. The electronics look to be all there. The quad is missing misc screws and bolts.
I could just keep the motor and sell the chassis as a roller, but I have enough spare motors the way it is.
Looking for best offer on this or stuff you might have. Looking for around $150-200
Located close to I-81 and 45min from I-78. Zip is 17970 (st.clair, pa)
