scrpe_gme_crzy Member Feb 2, 2015 112 2 44 Mar 17, 2015 #1 I just rebuit the top end of my 2002 xr80r and It starts but it only runs when on full choke and even when it runs it revs high. I need help
I just rebuit the top end of my 2002 xr80r and It starts but it only runs when on full choke and even when it runs it revs high. I need help
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,121 165 eastern australia Mar 17, 2015 #2 Leak test now. Pay attention to the reed block and carby boot, they are prone to leaking.
tbrooks Active Member Sep 24, 2013 1,367 233 114 NC mtns Mar 17, 2015 #3 ^^^^^^^^^^^^YES! Needing the choke on is a sure sign of an air leak, or lack of fuel
Awk08 Administrator Staff member Technician Jan 30, 2009 24,427 2,295 175 Usa Mar 17, 2015 #4 Please use a topic for your thread titles, such as "xr 80 rebuild help" Ect. From now on. Not "off topic this or that" Thanx. I did it for you this time, since it was in my section.
Please use a topic for your thread titles, such as "xr 80 rebuild help" Ect. From now on. Not "off topic this or that" Thanx. I did it for you this time, since it was in my section.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI Mar 17, 2015 #5 Double check float level, carb is clean, jets are clean. As mentioned, inspect carb boot, make sure clamp is tight. FYI, XR-80 has no reed block
Double check float level, carb is clean, jets are clean. As mentioned, inspect carb boot, make sure clamp is tight. FYI, XR-80 has no reed block
scrpe_gme_crzy Member Feb 2, 2015 112 2 44 Mar 17, 2015 #6 Larry's Shee said: Double check float level, carb is clean, jets are clean. As mentioned, inspect carb boot, make sure clamp is tight. FYI, XR-80 has no reed block Click to expand... The carb is clean. But I don't know the settings for the idle screw and the other one.
Larry's Shee said: Double check float level, carb is clean, jets are clean. As mentioned, inspect carb boot, make sure clamp is tight. FYI, XR-80 has no reed block Click to expand... The carb is clean. But I don't know the settings for the idle screw and the other one.
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI Mar 18, 2015 #7 http://lmgtfy.com/?q=2002+XR80r+carb+settings