WTB: +2+1 ASR arms, please take a look

[darealblaster]

Ok, so im looking for a right(throttle side) upper ASR +2+1 a-arm, BUT if you do have some in good condition for sale and wont like to separate them, i would consider buying the whole set if the price is right. ALSO looking for the tie rod to match the +2+1. Even if you odnt have the parts, please keep a look out for them and if you spot some, let me know!

 

[sicivicdude]

I told you the other day I'll make you a matching +2 +1 single upper for much less than you can buy a set of a-arms for.

You'd need to measure your other (opposing) upper a-arm in detail and relay those measurements and I can make another one to match. I also have the material here for a 5/8" chromoly tie rod if you needed a whole new one of those.

 

[245stroker]

Did you bend or break one? If so contact asr and see if they'll help you out. There suppose to be guaranteed, maybe they'll stand behind it

 

[sicivicdude]

Did you bend or break one? If so contact asr and see if they'll help you out. There suppose to be guaranteed, maybe they'll stand behind it

Or that! LMAO they are guaranteed but only against manufacturer defects. I doubt they'll stand behind some fool on a banshee bending one to pieces....

I've also only ever seen ASR +3 +1'1's. Do they make +2 +1's?

 

[245stroker]

All the ad's that I've seen for them they say there guarantee'd against bending or breaking. I don't know if they'll actually stand behind it, but if they state it in there ad's then they should

 

[sicivicdude]

All the ad's that I've seen for them they say there guarantee'd against bending or breaking. I don't know if they'll actually stand behind it, but if they state it in there ad's then they should

He can certainly try it! Worst they could say is no...

I'm fairly sure that in the legal documentation about their actual warranty is against manufacturers defects but you're right, all I've seen is "guaranteed against bending or breaking"...

 

[1995blaster]

yeah they guarantee against bending or breaking by any thing they have caused most likely its all about wording.

 

[darealblaster]

I told you the other day I'll make you a matching +2 +1 single upper for much less than you can buy a set of a-arms for.

You'd need to measure your other (opposing) upper a-arm in detail and relay those measurements and I can make another one to match. I also have the material here for a 5/8" chromoly tie rod if you needed a whole new one of those.

Yea i know bro, its just that I am reaaallly "particular" or how you want to call it, when it comes to this type of parts, and although i am not doubting your work, its just how i am, i really appreciate your help tho.

Did you bend or break one? If so contact asr and see if they'll help you out. There suppose to be guaranteed, maybe they'll stand behind it

Banshee rider crashed into me when he was retardly drag racing in a fiel full of atv's , destroyed my upper arm, bent it to hell, i odnt know how my lower a-arm and disks etc werent destroyed, rim was bent to sh*t and f7 headpipe is done for. I dont think they would warranty that, since even the best of the best would bend under those circumstances.

Anyways, i contacted ASR, tehy told me they have carried the same a-arms and told me to give em a call and they will take care of me, will call them up tomorrow and see what they do for me, so far good customer service, they answered my email in about 3 hours.

 

[darealblaster]

Just talked to ASR, they told me i would have to send the damaged a-arm to them plus 20 dollars and they will replace it. I asked them about the length, and they told me they have only made +3, thats wierd, so i told them that if they will send me an exact replacement and he told me yes, that if it isnt in stock, they will make one and send it to me as soon as possible. What ya think? Sound good to me, dont ya think lol

 

[Awk08]

thats freakin awsome !!!!!!!!!

glad sumthin is workin out for ya.

also, if these do turn out to be +3's
i have a set of tierods i was saving as spares in case i crack one up, but i'll let them go to you, just since this wasn't your fault

lemme know what the length ends up being and we'll talk $$$
but i'll take care of you

is it possible for you to measure from the center of the bike to the end of spindle, then i can compare to mine ???
left side will be fine, seeing as how you don't have a right side anymore

 

[245stroker]

Nice to hear that a company is going to stand behind its product!!!

 

[darealblaster]

thats freakin awsome !!!!!!!!!

glad sumthin is workin out for ya.

also, if these do turn out to be +3's
i have a set of tierods i was saving as spares in case i crack one up, but i'll let them go to you, just since this wasn't your fault

lemme know what the length ends up being and we'll talk $$$
but i'll take care of you

is it possible for you to measure from the center of the bike to the end of spindle, then i can compare to mine ???
left side will be fine, seeing as how you don't have a right side anymore

So i did some ghetto measuring, stock blaster width is 40 inches, the raptor 250 is 42 inches, that means its +1 on each side, so i measured the raptors a-arm and it measures 11 inches, i then measured the asr arm and came up as 13 inches, that means it would be a +2 on the raptor, so that means it actually is +3 on the blaster.

Forgot to add, the tie rod they will also replace for another 10 dollars

 

[Awk08]

Forgot to add, the tie rod they will also replace for another 10 dollars

oh shizzle, +1 for asr !!!!!!!!!