Wont start

[1bad442]

that wire should be bolted to the frame

 

[brandoz28]

it goes under a bolt head.

and did you test compression with a gauge???

did you follow proper break in procedures???

 

[Whitty21]

yeh that will be a ground. also, you kinda through us off track with the compression commet.

also, we see a lot of threads that say wont start why? we can't read minds, and i am not trying to be rude, it is just required. and we have fun on the site for sure, but we help as much as possible...

 

[blastngo92]

i didnt test it with the guage YET.... im not in a good mood, like i said some crazy sh*t has been happening today with me and i just want to get this damned thing running, now if there is anything you can tell me please do.... i know u gys have fun on here but you dont have to throw me off track like that and piss me off even more.... please remember that i am trying as hard as i can not to be a dick to u guys right now but im all about buissnuss right now, thanks for the apology and telling me where the wire goes

 

[brandoz28]

the wire goes under the nearest bolt to the frame.........................



generally under one of the coil bolts.

 

[blastngo92]

checked compression yesterday.... absolutaly nuthing in the guage

 

[sicivicdude]

Well, that means you get to rebuild the top end, again. :-(

Before you remove anything, do a LEAK DOWN TEST! If you have an airleak (which can ruin a top end) you need to know now. Not once you fry the new top end...

holeshotman sells them for $30 (which is a great price) or you can build your own (there's a DIY thread on it). Either way you need to find out why your top end went.

 

[roadkill]

check and see if the head came completely loose that happened to mee and i got scared thinking it was the top end but then i checked that and it was almost completey off and missing two nuts got a couple nuts (thanks to slick) tightened it up and was good to go

 

[blastngo92]

uuugggghhhh mayonnaise