Wont start

[durk85]

I was riding my 1990 Blaster when it stalled out and now it wont start. Even with ether, it wont start. Not sure where to start. HELP!!!!

 

[carl]

Need some more info to help you. Does it kick over or is the kick start solid etc...

 

[durk85]

It kicks over and doesnt seem to be seized.

 

[1997blaster]

is it getting spark, gas, air, compression if so it should run

 

[durk85]

i checked the spark and its weak. There is spark but its not the greatest. The plug was black and not wet.

 

[carl]

Plug might be shot.Try another plug?

 

[durk85]

I could but its a brand new plug. Only rode it a couple times with the plug. Could it be that its not getting enough spark? Or maybe not enough gas?

 

[1997blaster]

I could but its a brand new plug. Only rode it a couple times with the plug. Could it be that its not getting enough spark? Or maybe not enough gas?

ur getting to much gas. and its fouling plugs. it sound like mabe ur runnin a lil rich what size main jet u got in it

 

[carl]

If i was you i would do a basic service filter,oil etc.

Or clean the plug and try to bump it

 

[durk85]

Prob not a bad idea. I noticed it was low on oil. What oil is suggested?

 

[blasterdude14]

Prob not a bad idea. I noticed it was low on oil. What oil is suggested?

for what transmission oil? go with belray gearsaver mc1 for transmission. klotz supertechniplate for pre mix.

 

[durk85]

How can i check to see if the ignition is working correctly?

 

[blasterdude14]

How can i check to see if the ignition is working correctly?

if your getting spark then its probably working lol. try this turn the headlight on and kick see if light flickers. this lets you know the stator is working. i think your problem is just that you need to change the spark plug and jet it a little leaner and ride