wont start.........

[kennwood]

Your floats are stuck open and probably filled your crankcase with fuel. You are experiencing hydra-lok You have so much fuel in your engine and case that your piston is locked hydraulically by the extra fuel. drain your crankcase and smell your oil

 

[yes se-r]

Your floats are stuck open and probably filled your crankcase with fuel. You are experiencing hydra-lok You have so much fuel in your engine and case that your piston is locked hydraulically by the extra fuel. drain your crankcase and smell your oil

how could you be so sure of that?

 

[gscx1]

you cant drain the crank case of fuel, its a two stroke. And if the floats were sticking open it would run out of the overflow tubes. And yes it is ok tio see if it will start with the jets you have in now, just dont let it warm up if you are worried about it.Check the carb and make sure the boot is on right. And are how hard is it to kick? Are you sure you didnt put something in wrong and it is binding?

 

[trailrider19]

did you put the piston in backwards? i know some one that put one of the pistons in backwards on his banshee. it was hard to fire up and it acted like what you are describing. but his actually started and ran till the piston ring finally caught the port edge and, boom. just an idea. also, my blaster filled up with gas too. i had about 1/2gallon of gas down in it. i took off the reed cage and stood it on its grab bar and let it drain that way. but, it would still turn over like normal when i kicked. it just wouldnt start. now it still wont start but it tries to. this thing is all stock. i rebuilt the carb, put in new reeds, checked all wiring, and disconnected the TORS crap. it still wont start. im still messing with it though in my spare time.

 

[stephen12091985]

^^^ wtf is that in ur avatar a big squirill or however you spell it?


yea but you will definitly need to rejet that thing before you start breaking it in.