wireing trouble

[Chevy1500z71]

PLEASE HELP ME WITH THIS!
right now i am working on 2 blasters and have quite a few concerns with wiring, heres my main questions

will a blaster run with no wiring whatsoever, just a kill switch wired hot right to the coil?

what the hell are those 2 wires coming off of the top of the carb for and can i go without them?

im working on one blaster with a full stock wiring harness with headlight, tail light, ect and i got rid of oil injection by just taking the gear off of the pump and plugging it all off and im wondering if those wires on the carb have something to do with the oil injection?

im also working on a cheep blaster that will be running nothing but a kill switch. i removed the full hacked up wiring harness, key switch, tail light, everything except the 2 wires coming off of the coil and the ground for the engine... so do i put the kill switch on the 2 wires coming from the engine and im assuming the orange wire on the coil must have to connect somewhere on one of the 4 wires comming from the moter? im not going to lie, i need alot of help with this, i havnt a clue what to do with it... i suck with wiring, i hate it

if someboddy has a diagram that would be great, thanks for any help

 

[dbd13]

In the do it yourself section there is a wire diag, service specs and the TORS system - your wires at the carb top. The orange wire goes to the coil from the cdi. You would need the CDI and wires to the motor. Kill switch wires up to the CDI just as the factory one. It's all in the wire diag.

 

[Chevy1500z71]

ok, thanks alot