i got some parts that i believe are for a 350 warrior.rear end,motor and front a-arms and front disk brakes... i was wondering if the front disk brakes would fit my blaster or not..??? what parts will interchange with the blaster and warrior..???
will front disk brakes off a 350 warrior fit a blaster..??
- Thread starter 1998blaster
- Start date
If you can get a set of '03+up blaster spindles they'll bolt up. The warrior spindles are different from the blaster but the hubs and caliper's are the same. There aren't many things that interchange between the two, unfortunately
well i have front a-arms and a rear end and a motor that i can't use.i don't know anything about any of it.. how much is all of this worth..???
eBay ftw , compare condition , no knowledge on the subject but I thought the hubs were the same ? If true would it fit? Maybe with wheel spacers?
the rear hydros will fit but you will have to weld or create a mounting plate on the frame, near the footpeg to bolt the master cylinder to along with the resovior. then make a bracket for the caliper to bolt to your carrier, but i THINK? you can get a 03 + blaster carrier and it should bolt right up
i sold the warrior motor today...but i still have everything else...is there any bearing's on the axel where the rear brake disk is..??? i noticed mine is alittle sloppy ..could the clips be bad..?? or what is it???
