i have a 2003 blaster and i bought a exstended axle but now i want my front wider. i cant flip the wheels cause the calipers get in the way. i dont have a arm money and spacers ar a little mutch too so could i get shorter valve stems??
wider front!??
- Thread starter boardmaster272
- Start date
A 90* might work but I would just go with the flush. also, your only going to get 1-2 inches flipping the wheels around.
you can also drill out the other side of the rim and flip your rims so the stem is on the other side...if you do it right you can do it without breaking the bead
how would that work?? you would need to seal the other side up somehow?? unless you put a tube in, but that requires taking the tire off the bead.
on the cheap... buy a couple valvestems as short as you can find. pull the original valve stem out, put a new one in upside down, drill a hole on the other side and put a new valvestem in.
Thats what I did on a set of stock rims. Works really good and best of all, it'll cost you less then $10 and takes about 15 min to do it
