why is it leeking oil

[gafast280]

I bought a 01 blaster with bad top end had it bored 80 over pro x piston new bearing and so on. It is pouring oil I can't figure out where the whole bottom end is wet with the trany oil. Does anyone know why or where also how much oil does it take?

 

[03blasteryfs03]

it takes 650 ml of oil and it could be that the sealant on the two cases wasnt applied and let it dry before oiling or a bad clucth cover gasket or loose case bolts or a crack in the caseget it dryd off with a rag and look for wet spots

 

[Impulse986]

Check where the shifter goes into the case

 

[yb200]

did you put to much in.....it could be comming out the vent tube from under the hood