okay so currently i have only a barnett clutch and i ride in a camp where you can only have stock pipes so what are ssome good mods that i could run thanks
All of the above suggestions are definitely worth it, but as Wildcard states without a true port/pipe job you are just not gonna get the full affect of the (next level) after stock. BUT, here is a detailed list of the mods you SHOULD do, with the restrictions you are working with.
Get either an FMF Fatty or Toomey B1 head pipe, paint it BLACK, and have the stock silencer modded to fit(very easy, can be done with a rubber coupler and hose clamps, will not change sound levels)
Change your front sprocket from 13 to 14 teeth
Lose your airbox lid, install either K&N style or UNI filter
Pull stock #230 main jet in carb and replace with #260
Install aftermarket reeds/spacer(VForce 3, boyeseen, etc)
DO the
TIMING MOD (very easy to DIY)
Swap out Coil to high performance ( AMR makes a nice product)
Lose the stock rear tires(if still there)
This list will give you a substantial gain over stock, think you will be happy with the results...
And, NO ONE will know your modded, for sure...
Have fun.