Wheelies

Drifz1

Member
May 24, 2010
2,297
11
80
mayo,ireland
Guys iv tried an tried lean back give it throttle (1st or second gear )and it bearly pops up like maybe a foot of the ground maybe 2 >;/ and when it does i cant even keep it ! it just tops out in whatever gear im in! iv tried putting my feet on the grab bar but its just the same !im bored of the blasty so i really wanna do some whoolies XD but can :( any tips for beginners !? i only weigh 8stone so is that anything to do with it?
 
whats a stone again? like 12 pounds? it shoudl work out for ya with the foot on the grab bar. i say just keep practicing I:I
 
is your clutch bad?
you say it tops out in whatever gear you are in.

you problem might be lack of power and maybe gear ratio.
 
go up a little ledge and just give it full throttle in 1st gear and lean back. then just blipp the throttle.

or do the same on a small hill
 
try doin the timing advance diy. all you need is a flywheel puller and a drill. more power = more wheelie. My main problem is keeping the front end down. when she is runnin atleastX(
 
Put a decent pipe on it and jet for it.

Mine just has a UNI style filter, PWK28 carb, FMF Fatty, and Wiesco Piston bored .040 over.

I can just goose it in first and it wants to lift up. If I lean back and goose it, its wheelie time. I dont have to rev and drop or nothin. Just lean back a little and goose the throttle.
 
guys thanks for all the posts ! i learnt IMO its one of those things that just comes to you well it did for me anyway (i started with both my feet on the grab bar) and i was just getting good and i ran outa gas lol
 
mine comes up all the time. but learn about timing your shifts or hitting the powerband and leaning back at the same time,