what yall think bout this top end kit?

[blastermessiah]

i need a top end kit and was lookin at all my options...lots of memebers have suggested wiseco, so i found this on ebay? does this contain all that i need and is this the best price? if someone knows of a better deal, let me know.

p.s. i need .050 size

Yamaha Blaster Wiseco .050 Piston Gaskets Bearing Kit - eBay (item 200545400946 end time Dec-19-10 07:46:03 PST)

 

[mmajay]

The only thing i dont like about theses kits is the cheap rod bearing they include as well as cheap gaskets. Buy a wiseco piston on ebay and then get OE gaskets and a good quality rod bearing. Its cheap for a reason.

 

[Whitty21]

those paper base gaskets are engine killers, ask awk08, jus get the wiseco the oem gaskets as jay says

 

[mmajay]

those paper base gaskets are engine killers, ask awk08, jus get the wiseco the oem gaskets as jay says

Dont forget that RJ sells rod bearings that are cheap as sh*t. RJ is a great place to buy sh*t but there kits are lacking quality. The only good thing about that kit is the piston and rings, the rest is junk.

 

[Awk08]

way to pay attention guys, ......as stated, use only factory yamaha base gaskets

 

[AcidRayn]

for seals and gaskets, dont cheap out, stay with oem!

 

[mmajay]

My main concern with that is the chinese rod bearing they include in those kits. I ordered the same kit for a friend and you can see that the rod bearing is made in china. I had to put off a topend rebuild and re-order a wiseco bearing to complete the topend. Yes the paper gasket sux but the bearing is even worse.

 

[blastermessiah]

thanks for the responses guys....i have a hard time finding stuff on ebay...can someone post some links to cheapest yamaha oem gasket kit and wiseco piston .50 over.....i would really appreciate this. thanks.

 

[Drifz1]

WISECO YAMAHA BLASTER PISTON KIT 66.50mm .50 oversize - eBay (item 230555108232 end time Dec-25-10 08:50:04 PST)

 

[Drifz1]

iv heard good about these gaskets to ! Cometic Top End Gasket Kit 1988-2006 Yamaha Blaster 200 - eBay (item 360166355894 end time Dec-21-10 12:35:05 PST)

 

[myusername]

cometic gaskets are what i use. the base gasket isnt just the paper crap, it is metal like oem. i havent had a problem with them

 

[blastermessiah]

thank you drifz1: im confused now tho...the cylinder only needs honed out. the piston that came out says .50 on top....does that mean i need 66.5mm or 67.25mm? there is a sticky on engine section that has cylinder bore to cc conversions, this is where im getting the 67.25...please help

 

[Drifz1]

thank you drifz1: im confused now tho...the cylinder only needs honed out. the piston that came out says .50 on top....does that mean i need 66.5mm or 67.25mm? there is a sticky on engine section that has cylinder bore to cc conversions, this is where im getting the 67.25...please help

if it only needs honing you need the same size piston that came out( i might be wrong someone correct me if i am!) if its scored to far and it needs to be bored and hone you go up on size to what you already got!

 

[Whitty21]

honing only removes the glazing from the cylinder walls, and you use the same size piston

 

[Drifz1]

thought so ^^^^^^^^^^^^^^^^