what will happen??

[rad-blaster230]

i put a kawasaki 400 rear shock on my blasty a week a go and were i drilled out the bottom i drilled it a little sloppy

it has a little bit of play in it

is this bad?

if so can i fix it

 

[CC&Fabb]

um shouldnt be to big or a problem if you are using a grade 8 bolt but if you are that concerned drill the swing arm out to match the size of your "sloppy" hole on the shock. then get a bigger bolt. should fix your problem!

 

[rad-blaster230]

um shouldnt be to big or a problem if you are using a grade 8 bolt but if you are that concerned drill the swing arm out to match the size of your "sloppy" hole on the shock. then get a bigger bolt. should fix your problem!

i have a 8.8 grade shock in their right now, but i am a little woried about the suspension hole ovaling out. theirs not a lot of play but its definitly their

 

[cirame1]

mine is kinda the same but i dont have much play it is a lil sloppy and its kinda oval but still tight... but if ur concerned take your time and drill it out slightly more and use a bigger bolt and lock it down. that should do the trick...

 

[blaster20001]

ya i agree just drill it to match the other hole