What to use for puting case to gether

[dnoftz]

What is the best stuff to use to put the case halves together?
Thanks

 

[JonS]

yamabond. either variant you can get will work i'm sure. that's all i'll use.

 

[toytech]

x2 0n the yamabond.

do it once do it rite

 

[dnoftz]

Can i get it at any parts store or is a atv company only. is there any other brand stuff that works good

 

[blasterdemon7]

Yamabond - Yamaha Blaster Forum

 

[FTP]

Yamabond or Honda make a hondabond or something along those lines.

 

[Larry's Shee]

Three Bond Liquid Gasket 1194 TB1194
they also have a 12** (something)

DO NOT use siliconX(X(X(

 

[blasterisfaster]

I used hondabond because im an auto tech and i can get my hands on it for free. I havent had any issues with it, probably the same stuff as yamabond in a different tube

 

[happyhomer44]

threebond 1211 is the best from what i've found.

 

[StrokedTater244]

always have and always will use yamabond 4. i never use it, if its more than 2 years old.

 

[79 bronco]

yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4, yamabond 4,

 

[happyhomer44]

yamabond has been discontinued. It was made by threebond. you may still be able to find a tube here or there. Threebond 1196 is equivalent but 1211 is much easier to work with and wont string.

 

[StrokedTater244]

last it was dicontinued was about 3 years ago or so. it was not being made for about a year, maybe a little longer. they were using a replacememnt at the dealer made by loctite, it was a red semi drying sealant. it worked pretty well. i had tried some on an engine spacer in the past. i just bought a fresh tube of yamabond 4 about 3 or 4 months ago. as of then it was being made again and i have heard no plans of them discontinuing it any more, but i could be wrong. it is still on the shelfs around here though. i have actually never tried anything else. i might like another product better. but i am not going to try anything else though until i can no longer find yamahbond 4. i just stick with what has always worked for me and dont plan to change that.

 

[happyhomer44]

threebond 1196 is identical to YB4. I worked at the dealer when they discontinued YB4 and Yamaha told us to use the threebond product in its place. the 1211 is silicone based so application is easier and not as messy.

 

[dnoftz]

Ok. Thanks for all the input. went to my local dealer and got Yamabond 4 wasn't to bad it was only 10.90.

Thanks again