what size castle nut for 02 blaster

[kmac1979]

I just picked up a 02 blaster and I need to swith out wheels. What size socket do I need to remove the front and rear wheel/axle's castle nut and flange nuts. Thanks.

 

[slickerthanyou]

Can't help ya on socket size Im gonna guess and say fronts are 18-19mm and rears are 23-25mm???According to my manual they both are M14X1.5 threads. When torqueing the fronts are 70 FT. lbs and rears are 120 FT .lbs

 

[kmac1979]

are those sizes for the lug nuts on the wheels or the castle nut on the axle. Thanks.

 

[slickerthanyou]

are those sizes for the lug nuts on the wheels or the castle nut on the axle. Thanks.

Castle nuts! The lugs are M10 X 1.25 i pretty sure i used a 9/16 socket to take the rims off.

 

[kmac1979]

Thanks bud, I'll give it a try.

 

[vspec]

lug nuts are 14mm, front castle nut i believe is a 20mm, idk what size the rear is as i don't have any sockets bigger than 24mm to try.

but i think the rear might be 32mm don't quote me on that though.

the castle nuts on my blaster are quite large so i don't know if they are going to be the same.

 

[Teflon]

The wheel nuts are all use size 14mm sockets, the axle castle nuts are 22mm. Its the same for most of the Yammy sport quads

 

[kmac1979]

22mm on both axle castle nuts and 14mm front and rear wheels.