What screws do i loctite??
- Thread starter Nickmazz
- Start date
Theres no harm in putting loctite on EVERY external screw lol ... If you don't use loctite on any other screw, make sure you put loctite on the little screws that hold your reed petals in place ! You can imagine what would happen if even just one of them came lose and went into your motor .
Never, ever put Loctite on any screw/bolt that has to be tensioned to an important torque.
Never Loctite head/jug nuts.
Never Loctite the flywheel nut.
The reason is that Loctite acts as a lubricant when applied and will cause the fastening to be over tightened and can stress the threads.
Specified torque settings are for clean, dry fastenings.
Read the manual for information on which fastenings Loctite should be used on..
http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/
03+ supplement:
http://www.blasterforum.com/do-yourself-20/03-06-blaster-repair-manual-supplement-1916/
Never Loctite head/jug nuts.
Never Loctite the flywheel nut.
The reason is that Loctite acts as a lubricant when applied and will cause the fastening to be over tightened and can stress the threads.
Specified torque settings are for clean, dry fastenings.
Read the manual for information on which fastenings Loctite should be used on..
http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/
03+ supplement:
http://www.blasterforum.com/do-yourself-20/03-06-blaster-repair-manual-supplement-1916/
