I was wondering about the advance Vitos timming key .Also their Vitios high compression head gasket,they said it would bring up 10 psi using their head gasket. Has anyone used these products on their Blaster.Also was it worth it,Any power increase at all from these products.
Wanted know if anyone has used Vitos products!
- Thread starter ajaysblaster
- Start date
http://www.blasterforum.com/engine-13/vitos-high-compression-head-gasket-38356/
Check out post 11 for your answers
Check out post 11 for your answers
I've used Vito's gaskets, seals, and key on the Banshee with good results. I did the timing plate mod on the blaster http://www.blasterforum.com/searchr...27094460&cof=FORID:9&q=timing+plate+mod&sa=Go, noticeable improvement lo-mid rpms. Well worth it and free.
As to the old wives tale of the keys shearing, the key only indexes/locate the flywheel, the taper of shaft/flywheel are what really holds it. Odds are great that either key would shear, and it's either a bad wheel/shaft mating, loose nut, or other problem.
As to the old wives tale of the keys shearing, the key only indexes/locate the flywheel, the taper of shaft/flywheel are what really holds it. Odds are great that either key would shear, and it's either a bad wheel/shaft mating, loose nut, or other problem.
