wanted atc 200x rear axle and hubs

[4cfed]

granted not a blaster part but i figure maybe my blaster brothers can help me find or know someone that has what i need!!

looking for a 86-87 honda atc200x rear axle and hubs ( 83-85 willll not work!!)

must be in god working conditon and not bent!!!

83-84 honda atc 250r axle will work but id need everything except the brake rotor and brake hub.... axle, hubs, hub nuts, axle nuts, and drivesprocket and sproket hub..

located in fond du lac wi 54935 no pay pal but can send money order, iv done plenty of deals on here using money order so if your not comfortable with that post a thread asking and you wll get positive results, iv delt with kgibson earlyer this year on a pipe, x5boss on nerfs, and a few others,

thanks aric

 

[3 Wh33l3r Rid3r]

fed i may have a 250r axle but i wont know what year as it came with the whole bike i got from him that was in pieces. i will check and see if i still have it and send some pics and maybe u can tell what year it is

 

[4cfed]

Ok lemme knows, it got hubs sprocket and all nuts with it?

 

[3 Wh33l3r Rid3r]

im not sure man, its been awhile since i been through the extra parts i have and a couple buddies of mine could have gotten to use for theirs. im out of town till friday i will check and see then

 

[4cfed]

Ok thanks man, just hit me up when you get a chance to look at it

 

[StrokedTater244]

dont wanna junk up your thread but if you or anyone you know is interested i have a new sprocket specialists 35 tooth rear sprocket..the small 4 bolt for old honda trikes i have been trying to sell it at a decent price..sorry again..thanks! and good luck!!!

 

[Awk08]

i can call a local junkyard tomorrow for ya bro, they had one back in the day for my 87 200x

 

[4cfed]

Thanks awk, lemme know..

Tator ya damn thread jacker!! Lol jk! Might be interested in the sprocket if it will work on mine, might have to drop a tooth on the front, dunno if the 6 speed trans would have the gearin to use that small of a rear.

 

[Awk08]

better yet fed, heres the number, you can tell them exactly what ya need better than i can.............
kneppers atv/bike salvage......814-445-2499

if avaliable, they'll prolly even ship it to ya, but lemme know if i can help

 

[StrokedTater244]

Thanks awk, lemme know..

Tator ya damn thread jacker!! Lol jk! Might be interested in the sprocket if it will work on mine, might have to drop a tooth on the front, dunno if the 6 speed trans would have the gearin to use that small of a rear.

hahahaha.. let me know whenever.. it was like $65.. im talkin maybe half that and someone can have it..i have no use for it...its still in the original pakage.

 

[4cfed]

Awk.. Maybe you could call them?? Seeing I'm out of state they may jack the price up since ill seem desperate since I'm callin a diff state lol....

Simple as this.. Need a axle for a 86-87 honda atc 200x and matching hubs,

I'm trying to find a oem before going with the 250r

 

[Awk08]

will do fed, just copy and pasted the info, will try to call tomorrow and holler

 

[4cfed]

Ok thanks man...

If it comes down to it I'm gonna end up getin a swing arm that's cllose in side and cutttin the back off it and cuttin mine and haven them welded together, and go +2 on it, I alnmost wonder if a blaster swinger is close

 

[4cfed]

Guess if it comes down to it ill just get it straightend, was running it on the lift today an shimmed the wheel to get It to track close to straght, only one side is bent so shouldn't be a problem gettin it straightened