Ok so was siting around board and got to thinking. I can Make my own +03 hood mold and make My own hoods. Wther it bee plastic or fiber glass.
So Here is my start. started taking pics after I started sorry. So what I did is take a 03 hood lined it with Aluminum foil. Got a few cans of spray foam and started spraying it.
[/IMG]
Had to let that get put the news print in so I chuld press down on it and get it in the corners.
This is the second can of spray foam.
[/IMG]
This is after it has started setting still needs to dry over night.
[/IMG]
[/IMG]
After it is all dry and nice and hard I will separate the foil then the fun starts.
Have to and it down smooth it out and fix any sots that re not flat Put a thin coat of Bondo on it the I will be ready to do so glassing
So Here is my start. started taking pics after I started sorry. So what I did is take a 03 hood lined it with Aluminum foil. Got a few cans of spray foam and started spraying it.

Had to let that get put the news print in so I chuld press down on it and get it in the corners.
This is the second can of spray foam.

This is after it has started setting still needs to dry over night.


After it is all dry and nice and hard I will separate the foil then the fun starts.
Have to and it down smooth it out and fix any sots that re not flat Put a thin coat of Bondo on it the I will be ready to do so glassing