ok i've been doing some quick measurements and for the front motor mount
i need like almost 2 inches past the stock point any suggestions on where to cut the bars and to modify them?
also on the rear it looks like width wise i would be in good shape to use
the tri Z swinger since the width is the same but the placement on the
motor is different between blaster and the tri z .
the tri Z is longer and already set up with hydro brakes and a longer axle.
seems like a win win,,, as soon as i can get it to work on the frame..
mounting the radiators i think wont be that bad maybe some custom hoses
but thats the easy part and having an actual gravity feed gas tank will
be a huge blessing on that motor.
any other suggestions i'm all about it..
i need like almost 2 inches past the stock point any suggestions on where to cut the bars and to modify them?
also on the rear it looks like width wise i would be in good shape to use
the tri Z swinger since the width is the same but the placement on the
motor is different between blaster and the tri z .
the tri Z is longer and already set up with hydro brakes and a longer axle.
seems like a win win,,, as soon as i can get it to work on the frame..
mounting the radiators i think wont be that bad maybe some custom hoses
but thats the easy part and having an actual gravity feed gas tank will
be a huge blessing on that motor.
any other suggestions i'm all about it..
