Transmission cam install

P

phantomdaz

Guest
I have just put a new crank and rod in my blaster but I was not bright enough to look at what position the shift cam was in when I took it apart.
I have the correct shift forks in the correct positions and facing the correct way according to the manual.

I did a manual shift with the case apart and it all looked like it was right but after assembling the case halves, I can not get it to shift correctly

Anyone maybe have a picture of the correct orientation?

Thanks
 
Hmmm?

That's a tuff one. With the smokin' ass people on this sight it may be easier to post a pic of what you got. Show where the numbered forks are, the position of the cam, the lever, spring, etc. let the crew take a gander. We got a lot more eyes and have seen a sh*tload of these. Be a more helpful than the other way.

A
 
You got a point, I had not thought that.

I have just reassembled the case halves, I will need to pull it apart again as soon as I get a few minutes

Thanks again