toomey expansion chamber

[BACKatIT]

Hello im new here name is Joe. I just picked up a B1 expansion chamber used and there is material like ehats in a silencer falling out of it. Is this normal or is it junk..thanks

 

[Awk08]

Hello im new here name is Joe. I just picked up a B1 expansion chamber used and there is material like ehats in a silencer falling out of it. Is this normal or is it junk..thanks

sounds like mice made a nest in it while laying around,
make a little hook on a coat hanger and fish it all out, then rinse thoroughly.

 

[YZX]

try blowing compressed air out of one end.

 

[Blaaster]

When you fit it make sure it is leak proof and correct your jetting.

If you list all your mods and someone will chime in with jetting info.

 

[BACKatIT]

Awk08 thanks thats exactly what it was.
Blaaster im not sure if my blaster is bored out or what jetting it is but im sure its not stock. The mods I know it has is fmf exhaust, aftermarket air filter with drilled lid and the aluminum boyseen reed set up with spacer. Thats how I bought it the only thing I added so far was pro raper bars and getting ported and polished soon. With the toomey b1 chamber I picked that up for $40 and that all he had. Need the piece that goes on the head and the silencer, hopefully pick the misding pieces up soon..

 

[Blaaster]

The FMF should be jetted around #290- #300 main , but the Toomey is a little thirstier up top and may require anything up to #330.

You will need to plug chop to confirm.