tire size
- Thread starter egghead
- Start date
if you have the stock heel guards on 22' might be too big, i tried to put 22' mud lites on and the rubbed going around corners.
if u do a lot of mud riding then u might want to get 22" but if u do just a little bit of everything then 20" work just fine
so basicly it all depends on where and how u ride
so basicly it all depends on where and how u ride
20x11x8 is what I run too... maybe it 20x10x8... but still, really nice size.
i run 18 inchers for the beeter cornering, but you need to re gear for those, 20's are the best all around tire for doing everything, no mods needed here, 22 inchers are too bigand you need either a wider axel, or to take off the plastic mud guards and cust off the metal tabs, the 22 icnchers work best for snow and mud, depending on the tread size, they ae not good sliding tires, but with stock gearin, if you pop the clutch in first gear it will wheelie awesome, i have 22 inchers on in my sig pick.
Ya 20" are in the middle of spectrum and good if you ride alot of different surfaces. I run 22" also but only when riding in the woods to raise the ass end up some.
