throttle sticking

[2strokepower]

i have a moose racing thumb throttle and it sticks, what do i do

 

[NOVIS]

have u put any lubricants on it like wd40 or 5in1. if not spray some on and see

 

[2strokepower]

no i havent but i will try that tomorrow.

 

[tyler1blaster]

its either that or tors.....

 

[2strokepower]

i have a different carb and throttle i dont think i have tors

 

[mr_3_0_5]

maybe your cable is frayed and binding up..

 

[L.T.]

its either that or tors.....

no way man TORS would not do that. (the TORS would bring the revs down as soon as the throttle sticks and you let go of the throttle and the TORS button (inside of the thumb throttle) engages the TORS)

You have to lube the cable but I don't think it is that because I had the same problem it only sticks sum time's rite?

you need to clean your carb out good, also check that your SLIDE is not worn out PM me if you need more help and I will help you out where I can

 

[tyler1blaster]

yeah your right its not tors i didnt look at his signature..........

 

[L.T.]

yeah your right its not tors i didnt look at his signature..........

yea man I had the same problem long ago and it was the carb messing around but don't get me rong here it can be the cable that is fried like 305 said.

 

[mr_3_0_5]

no way man TORS would not do that. (the TORS would bring the revs down as soon as the throttle sticks and you let go of the throttle and the TORS button (inside of the thumb throttle) engages the TORS)

You have to lube the cable but I don't think it is that because I had the same problem it only sticks sum time's rite?

you need to clean your carb out good, also check that your needle seat is not worn out PM me if you need more help and I will help you out where I can

the needle seat wouldnt have anything to do with this..
its between the throttle and the slide.

 

[L.T.]

the needle seat wouldnt have anything to do with this..
its between the throttle and the slide.

well you know what I ment and I changed it, sorry my bad

 

[2strokepower]

it was due to lack of lubricant. i used wd40, and now it works greatI:I

 

[L.T.]

it was due to lack of lubricant. i used wd40, and now it works greatI:I

good to hear that you got it sorted I:I