Throttle Help Please!

[Smoking_Zuma]

Ok, so here's the story.... The throttle on my blaster comes back to far and hits the little red "engine kill" button inside the throttle assembly.... SOOOO, I figured I could just bend the spring coil a bit to make the throttle not snap back so far and hit that.... SOOOOO I took apart the little stack of washers/ parts that holds the throttle assembly all together, and now.... *&(%#$*^$# I CAN'T GET IT BACK TOGETHER!!! Help please?

A diagram of the way the parts fit together might help, but i can't find a very good one. Thanks so much, and yes, I know... I SUCK

 

[fioz600r]

Welcome to the site bro.

Here is a downloadable manual link for you. You should be able to find what you need.
http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/

 

['05Blaster]

haha, fioz beat me to it but goodluck dude!

 

[Smoking_Zuma]

Thanks guys.... already had looked at the manual- throttle assembly isn't covered very well in there... anyhow, i figured it out, got it back together and just soldered on a little stopper to keep the throttle from coming back and hitting the kill.... probably not the safest idea, but i guess it works....I:I

 

[fioz600r]

any chance you have a pic of the kill swith set up it is supposed too be on the other side of the hadlebars. You must have an aftermarket kill swith on it bro.

 

[Smoking_Zuma]

it's not an actual kill switch... the kill is still where it is supposed to be. this is a little red button INSIDE the throttle assembly.... when you let go of the throttle, it should bounce back to ALMOST hitting the red button, but not quite..... i think it's so that if your throttle gets jammed it kills the bike. I'll go take a pic real quick....

 

[Smoking_Zuma]

 

[yb200]

that button is for the tors throttle override system....is must not be working it is a safty feature

here is a link on how to remove the tors system (not sure if 03+ is the same as 02-)

http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/

 

[DirtDiggler]

get rid of it , install a twist throttle

 

[yb200]

imo i wouldt get a twist