This problem will not be a problem for long.

[BlasterHoss02]

check Big Probs down below for what started this. popped jug off, piston , (exaust side), was f*cked. piston slid l to r about 1 inch. crank is good. this prob is hard to explain. call 254 876 2289, for in depth details if you can help. James, the redneck.

 

[mike2225]

what?..........................

 

[scotj77]

the piston slid left to right about one inch? is that what you are saying. short answer to what you said in the first tread you started AIR LEAK. overheated and seized the piston. kept runnin it after it cooled and melted the exhaust side(hottest side) of the piston. send your jug to ken occonor and he will take care of everything and buy a leakdown tester from holeshotman and don't shortcut anything on the rebuild. all new gaskets, do the leakdown, break in proccedures and plug chops and then everything will be fine. by the way calm down, don't get so worked up about it, that doesn't help anything