just cu them if your bypassing tors. there is a thread in the diy section that explains how to bypass the tors system good. i dont think thats why its revving you may need a new coil, check it with an ohm meter andthe specs. it says in the book(repair manual, you can probably find one at your local library or cheap on ebay if you dont have one) it may be bad. it could be the throttle stuck open too. if you have a book then follow what it tells you about high revving, otherwise buy one or look in the diy i got a downloadable one on the comp from a link i found on this site, it was free and only took about 5 min to download on satelite internet, and it is the full repair manual. if i find it again ill post were i found it.