stroker crank

[dave2002blaster]

can i drop in a stroker crankshaft and still use my 66 mm piston i want to build slow from bottom up, will a stroker work with all stock motor parts? thanks David

 

[Triple_B]

If your talking about a Vitos +3, then yes. If it is a Hot Rods +4, you will the cases to be trenched.

For either option, you CAN use the same piston but you will need the cylinder ports to be matched by a professional.

 

[brandoz28]

if you want to do it this way, use the +3 and just run the spacer plate. it'll run ok, but nowhere near as well as having it ported to match, which you can do later