Stroker Blaster motor

[Braapbraap95]

Have a whole, completely rebuilt about 20hrs ago engine assembly minus the piston which was taken out due to low compression. It has portwork to match the +3mm stroker... So its sold as a package-the piston. If you can figure out how to ship it, its yours 130+ ship.

 

[burnin'_oil_2001]

Have a whole, completely rebuilt about 20hrs ago engine assembly minus the piston which was taken out due to low compression. It has portwork to match the +3mm stroker... So its sold as a package-the piston. If you can figure out how to ship it, its yours 130+ ship.

I am interested...I also sent you a pm.

 

[Braapbraap95]

Forgot to mention... This motor needs a new spacer plate+gaskets! You can get the two for about 20 and some change at vitosperformance.com

 

[burnin'_oil_2001]

Forgot to mention... This motor needs a new spacer plate+gaskets! You can get the two for about 20 and some change at vitosperformance.com

I can only find the spacer plate w/ a stroker crank. You said that the cylinder only needs honed and a new piston kit-- what size piston kit does it need?

 

[Braapbraap95]

When it was rebuilt it was .60 over, so you'll need a .70

 

[burnin'_oil_2001]

thanks, all the info I can get helps.

 

[Braapbraap95]

No problem what-so-ever my man. Sale pending, but nearly sold.

 

[Braapbraap95]

Going once, going twice, engine soldddd!