Strip down and re-paint
- Thread starter Blasterdude27
- Start date
Dude go to a bit more work take those bars and steering stem off and remove the spindles form the a arms and do it right. Take 20 more minutes and do it the right way, dont half ass on it.
yeah, i would strip the whole frame down. the a arms too. take the brakes and everything off. and idk if anything will happen but i wouldnt just leave your engine sitting on the rocks like that and i would tear the blaster down on like cement or something, not rocks. just make sure you keep onto every one of those nuts and screws. good luck though! want to see how it comes out
layin the engine down on rocks wont do anything???? heck it might be better than laying it on hard concret...the rocks can shift around and make like a nest to cradle the engine unlike concret were it can roll around!
Halfassing would be taking off the plastic and calling it good
But your right Fabb... So today before I did anymore I took the stem off.
ya man, rip the rest of the shiet off the frame and pressure wash it good.
take some sand paper over the whole thing and go to town!
take some sand paper over the whole thing and go to town!
