strange rattling ?

[scrpe_gme_crzy]

So I flipped my blaster... And I got it back over and nothing was hurt but the handlebars bent a little bit. the only thing I noticed is that there was some type of rattling? It would only rattle when you hit the gas (while idling) and when it revved back down it would rattle. It sounded like it was coming from the engine, and I have no idea what could possibly be doing that. Please help thanks btw I was just looking at my blaster and I noticed the bottom chain roller was loose and wobbly. Could this be it ?

 

[blaster003]

i know mine did the same thing and the locating pin came out of the piston and the ring snagged an exhaust port but i didn't flip it. just check and make sure everythings tight.

 

[scrpe_gme_crzy]

i know mine did the same thing and the locating pin came out of the piston and the ring snagged an exhaust port but i didn't flip it. just check and make sure everythings tight.

How in the world did the locating pin come out ??? But it just rattles when it revs back down? I don't think it's the locating pin but I will check later just in case

 

[Fast6hand]

I have a washer on my brake pedal that rattles when coming off throttle. Start it and listen closely to where it's coming from.

 

[Blaaster]

If you run oil injection you should really bleed the oil pump, let's pray that lack of oil is not the problem.

Sometimes after a flip the axle carrier can move out of plumb and cause the chain to run off line and rub the sprocket sides.

Loose rollers can make a funny rattle at certain engine speeds.

 

[sjwh]

Does it still have the stock exhaust? Maybe the little cone inside came loose when you flipped it.

 

[scrpe_gme_crzy]

Does it still have the stock exhaust? Maybe the little cone inside came loose when you flipped it.

No I have a fmf gold series fatty pipe on it

 

[scrpe_gme_crzy]

So I flipped my blaster... And I got it back over and nothing was hurt but the handlebars bent a little bit. the only thing I noticed is that there was some type of rattling? It would only rattle when you hit the gas (while idling) and when it revved back down it would rattle. It sounded like it was coming from the engine, and I have no idea what could possibly be doing that. Please help thanks btw I was just looking at my blaster and I noticed the bottom chain roller was loose and wobbly. Could this be it ?

Fixed the rattle guys , it was a lose exhaust manifold . The exhaust gasket was vibrating because the manifold was loose.

 

[speedyslyder]

 

[scrpe_gme_crzy]

View attachment 22635

Lolol thanks

 

[Dutter]

Must be a Wiseco that the pin came loose on!! That is a very common thing and why I'm not a big fan of them. I'm sure most of you will tell me I'm crazy but I've seen this happen many times and it's always that brand