Steering Damper

[Blaster61]

Hey guys just looking to know where i would be able to find a Steering Damper for a yamaha blaster ? thanksI:I

 

[Awk08]

i have a denton, 7 way adjustable, i got used/like new locally for $50, but was looking at the one from snydermotorsports.net, looks similar, and reasonably priced, $127, i think.
check out their site, and it's on ebay too

 

[hotrodaj_2]

I cant find that dampener awko8. I found others but not on snydermotorsports.net. That's a good price send the link if you got it, thanks

 

[Awk08]

try this one.....................
Streamline Steering Stabilizer/Damper Yamaha Blaster: eBay Motors (item 140406310247 end time Jun-07-10 21:09:37 PDT)

or call snydermotorsports, the number is............
330-345-5443 ask for shawn, he's the owner, seems they have a new kid working there that isnt the sharpest tool in the shed,
i had a half ass engine bolt kit sent to me, and kept writing them on ebay, shawn took over the deal and sent me a whole new kit, not just the ones that were missing

 

[phragle]

I got mine at off road warehouse, but then again... its a Bilstien, made to fit a VW bus.....

 

[hotrodaj_2]

How important is getting a rebuildable one. Do you ever hurt them? If their pretty tough than I might get that one. Thanks< +rep

 

[Awk08]

i'd say they're fairly tough,
if you plan on having that bike for the rest of your life, then get a rebuildable one??

 

[DUALSTROKE]

A rebuildable one is the way to go.I have the same as awk a denton 7 way adjustable and a non adjustable pep.The pep is basically garbage cause it can't be rebuilt.The adjustability part is a very good feature also.Just move it a click and it makes a big difference,go all the way to 7 and you will barely be able to turn your bars.

 

[bigbadblaster200]

what does a steering stablizer do anyways

 

[yzrider]

when ur going at i hagh speed, u set it stiffer to make it so the bars don't jerk from your hand, or set it just a little firmer to steady the bars for mx or trails

 

[nofxfan125]

I'd get a rebuildable. I tore mine apart because the bolts on the stem got loose, and i actually wrapped the damper around the steering stem. busted out the seals and sh*t and bent the hell out of the damper. I straightened it since, but haven't had a chance to rebuild it yet.