stator

[89mustang]

alright im gunna pick your guys brians on this. i put my old stator plate and stuff back in my bike. and it worked then it quit. couldnt figure it out so i put an adjustable one in and it ddint work made my bike completly boggy. so my buddy brought his over off his bike and we put it on and started it like 7 times and each time it ran liek a beast. so i took it off and screwed around with the clutch trying to adjust it and sh*t and i was going to give the stator back to my buddy but tried it again so i put it in the bike again and the bike wont start. now my question to yall is, is there somehting on the bike like the voltage regualtor maybe buring out my stators.???

 

[yamaha28]

So a stator didn't work, you tried it on your buddies and it worked. Then put it back on yours and nothing? Sounds like something else is wrong

 

[blasterdemon7]

Check your wire harness for bare wires and check all the grounds.

 

[89mustang]

well my biek wouldnt run at all it ran but it was so boggy you might as well say it didnt run. but i figure out the junk ebay stator was hitting the flywheel so i threw my old one in and it worked but then it quit. so i threw my buddies stator in and it wokred for like 7 kicks and ran great, so i took it out but a day laster i put it back in and it wouldnt give me any spark so i through it in my buddies bike this moring and nothing. so something has to be fryin these stators

 

[89mustang]

all grounds are fine. bare wires there are none

 

[blasterdemon7]

You will have to break out the ohm meter and manual.