Whats going on gentlemen? I've got some issues with my 05 blaster. They fly wheel is getting stuck after a few kick starts so I'll have to use a wrench to make the flywheel spin again i can feel some tension when spinning the flywheel. Any solutions or should i just break the engine down and indirect from there?
Starting problems
- Thread starter nickster525
- Start date
Sounds like you need to be investigating the problem.
Do not keep trying to turn the engine over, you may make a small problem into a larger one!
Do not keep trying to turn the engine over, you may make a small problem into a larger one!
I would start on the flywheel side. The pickups can come loose and get wedged in there. You will need a flywheel puller to get it off. If all checks out in there check the clutch side. As Blaaster said do not try starting it anymore.
Similar threads
