Sourcing Bottom End Parts

[rarak69]

Looking for some good retailers online to get my bottom end bearings from.

I bought a craigslist motor a while back for my project, motor ran ok, but seals were beat up. After disassembly i noticed some water made its way inside a little somehow, bearings were gritty.

Removed all bearings, blasted the case. Doing a total rebuild on this motor.

I need to find ALL bottom end bearings somewhere. I cant find a "kit" so i guess individual parts then? I cant seem to find a place that offers this. Is this going to be dealer only?

 

[blasterdemon7]

I would try this place. They should be able to build a kit for what you need.
Yamaha Blaster Rebuild kit - Yamaha Blaster Bottom End Rebuild Kit - Blaster Engine Parts - Yamaha YFS 200 Blaster Specialist page - Ian E Performance Motorcycles & Parts

 

[rarak69]

I would try this place. They should be able to build a kit for what you need.
Yamaha Blaster Rebuild kit - Yamaha Blaster Bottom End Rebuild Kit - Blaster Engine Parts - Yamaha YFS 200 Blaster Specialist page - Ian E Performance Motorcycles & Parts

i saw that on google search, im in US, it would be a shame to have to order from the UK! but if i have to i will

 

[blasterdemon7]

I'll look around a little more to see what I can find.

 

[cdywes]

Check motosport.com, i think they have a bottom end rebuild kit on there.

 

[cdywes]

Wiseco Complete Crank Kit | MotoSport
i think that should be everything you need for the bottom end.

 

[JonS]

boss bearing is a great place to get your bearings. their on ebay.

 

[Jammies]

Cdywes, Wiseco makes horrible cranks. Watch this vd, explains everything.

 

[EvilElvis]

I would try this place. They should be able to build a kit for what you need.
Yamaha Blaster Rebuild kit - Yamaha Blaster Bottom End Rebuild Kit - Blaster Engine Parts - Yamaha YFS 200 Blaster Specialist page - Ian E Performance Motorcycles & Parts

Do you know the conversion of currency? £190.00 =almost $300+ LMFAO

 

[slickerthanyou]

cheapcycleparts.com is where i got all of mine yes individual, However Napa can get any bearing u have if ya bring them the old one!

 

[slickerthanyou]

BTW-
Ok here ya go here is every bearing in our motors minus the rod bearings!

these are yamaha part numbers!

Balance shaft bearings 93306-20335-00 and 93306-20211-00

Clutch push lever bearing- 93315-21429-00

Tranny bearings as follows:
Drive axle (sprocket side)- 93306-30421-00
Drive axle (1st gear side)- 93311-51554-00
Main axle- (clutch side)- 93306-20431-00
Main axle- (5thGear side)- 93311-31567-00

Crank bearings-
(Flywheel side)- 93306-20562-00
(Drive gear side)- 93306-30556-00

Flywheel woodruff key- 90280-03017-00

There does that help?

 

[vspec]

Cdywes, Wiseco makes horrible cranks. Watch this vd, explains everything.

Wiseco Crankshaft Made in Taiwan - YouTube

Makes me glad I have a hotrods crank.

 

[cdywes]

sorry, i had no idea that wiseco made such bad cranks!!!!!!!!
lol i thought they were a good brand