Running problem

[ridndirty]

ok I just put on a vitos 240 kit bike won't start if I do get it to start it revs real high and kills it is the stock carb and has the tors removed I took the carb bowl off it is getting gas and I sprayed it all with carb cleaner can anyone help me with this problem thanks

 

[Blasterdude27]

Did you re-jet your carb? has the tors been removed right? what about the oil injection?

 

[Unstock240]

You have the jetting done correctly? Thats most likely what it sounds like to me.

 

[stephen12091985]

check you reeds to

 

[peacher213]

Ya jetting or air/fuel screw is out of wack

 

[peacher213]

my bike ran with broke reeds but it had ZERO power as id try to take off it would just stall

 

[coreyownz]

well if it the vito 240 bigbore your required to block off oil so make sure ur premixing 32-1 on 93 octane check your reeds and your jets what are all the mods you have and whats your jet size? pm and ill help

 

[ridndirty]

ok update i got a 36mm carb jetted at 180 still wont start put the stock reeds back on and tried that still wont start if spray carb cleaner in it it will runn wide open for a second and thats it this is driving me crazy

 

[2smoker85]

we need your parts you have done to it, we can't help you if we don't know what you have and what you have done so far

 

[ridndirty]

keihin 36mm carb with 180 jet vito 240 kit fmf pipe stock reeds 93 octane gas mixed 32 :1

 

[ridndirty]

Can someone please help me or know someone in Louisiana that could