Removing links

[slickerthanyou]

Before I go butchering up this new chain, need to remove 2 links from this chain I got off of egay. Is is a 94 link o-ring and I cannot get it to adjust correctly. Is there a proper method to cutting these or just grind off what I don't need? I tried to use the adjusters all the way in and all the way out with no luck 1/2 way it's just too long by a couple links. I have stock arm 14t front 40t rear. I hate when sh*t you buy isn't right!X(

 

[98blaster+4]

do you have a bottom roller and rear chain guide. cause a proper length chain will look way too long without these 2 things

 

[super noober]

^^^^^ this first, then yeah, i just ground down the rivets and popped it apart where i needed.

 

[slickerthanyou]

do you have a bottom roller and rear chain guide. cause a proper length chain will look way too long without these 2 things

Yip I do.

^^^^^ this first, then yeah, i just ground down the rivets and popped it apart where i needed.

Thank ya!