Remote rezzi

[Blasterr525]

is it possible to switch rezzis on shocks? like on rezzi from one shock to another? please help

 

[brandoz28]

why are you wanting to do this?


to swap them you're going to have to service the shocks as well, fresh oil and nitrogen

 

[Blasterr525]

why are you wanting to do this?


to swap them you're going to have to service the shocks as well, fresh oil and nitrogen

Beacuse the little screw broke off where the cap is on the side where u adjust the stiffness

 

[brandoz28]

you can do it, but you're going to want/need to rebuild the shock as well

 

[Blasterr525]

you can do it, but you're going to want/need to rebuild the shock as well

when u say rebuild, you mean?

 

[sheeblast]

put new seals in it.

 

[DirtDiggler]

new seals ( unless you are talented , a shop will have to do it ) then new shock oil ( thats easy enough any red assed baboon can pour oil into a shock body ) then you gotta have that springy potential face remover charged with a dose of pressurized nitrogen ( yup keep your face away from that while it fills or you're gonna look like you been chasing parked excavators ) and there ya go , rebuilt shock .

 

[MXsandracer]

with this idea... i have rezzi shocks up front but they are not ACR rezzis, if i pick up a set of cheap shocks that do have ACR rezzis could i just switch them onto my shocks? obviously i would have to recharge them but they need to be rebuilt anyway

 

[Blasterr525]

with this idea... i have rezzi shocks up front but they are not ACR rezzis, if i pick up a set of cheap shocks that do have ACR rezzis could i just switch them onto my shocks? obviously i would have to recharge them but they need to be rebuilt anyway

why dont you just use the shocks that come with the acr rezzi?

 

[MXsandracer]

i have works shocks with just standard rezzis, i can get cheap ($10?) cr125 rear shocks off ebay. the cr's have acr rezzis so wat i want to do is move those rezzis onto my works. Since Works charges an arm and a leg to get rezzis mounted on your shocks i figured i could make the upgrade myself for waaay cheaper

 

[Blasterr525]

oh, alright. but u gotta get new seals put in and probaly want to have a refill of nitrogen and oil too

 

[brandoz28]

oh, alright. but u gotta get new seals put in and probaly want to have a refill of nitrogen and oil too

you have to do fresh oil and nitrogen refill when you open them up

 

[Blasterr525]

you have to do fresh oil and nitrogen refill when you open them up

oh you hve to ok. Thanks brandoz