reed spacer?? help

[tio ale]

how to instal reed spacer on the blaster

 

[stephen12091985]

i think it goes on the carb side of the reeds

 

[tio ale]

i think it goes on the carb side of the reeds

so i put the spacer then the reeds

 

[stephen12091985]

idk some people put the spacer then the reeds then intake boot then carb

and some people put it like the reeds,then the spacer,intake boot,then carb to move the carb away from the clutch arm.but its call a reed spacer

so i would think the spacer then the reeds

 

[blaster01]

yea im pretty sure the spacer goes in front of the space....so it would be spacer, reeds, intake boot, carb

 

[yzrider]

yeah, mine goes, spacer,reeds,carb,intake

 

[lasxgames]

Spacer / reeds / carb for low and torque
reeds / spacer / carb for top end

 

[tio ale]

Spacer / reeds / carb for low and torque
reeds / spacer / carb for top end

i did reeds...spacer then the other stuff....thats fine??

 

[lasxgames]

Yep check jetting what size spacer

 

[lasxgames]

That's how mine is and there are different width spacers also. This will lower your power band based on the thickness

 

[tio ale]

That's how mine is and there are different width spacers also. This will lower your power band based on the thickness

the spacer is 5/16

 

[airwave]

the spacer goes aginst the jug if you put it be hind the reeds especialy if you have vforce threes the reed cage will blow out of the reed cage housing the spacer is bigger than the reed cage and those reeds snap together and they will snap out been there done that

 

[lasxgames]

Spacer / reeds / carb for low and torque
reeds / spacer / carb for top end

spacers also come in different thicknesses like 1/2 inch, 3/4 inch

 

[phragle]

it can go on either side and does different things depending on where its put. Do you know why? do you know what it does? if you don't, then why are you putting a reed spacer on you bike??

 

[DirtDiggler]

it can go on either side and does different things depending on where its put. Do you know why? do you know what it does? if you don't, then why are you putting a reed spacer on you bike??

I put it on cause its shiny........

 

[hudack]

it can go on either side and does different things depending on where its put. Do you know why? do you know what it does? if you don't, then why are you putting a reed spacer on you bike??

educate me on this subject godafther unless you think the search function would serve me wll

 

[79 bronco]

it can go on either side and does different things depending on where its put. Do you know why? do you know what it does? if you don't, then why are you putting a reed spacer on you bike??

Does it help throttle response by allowing the fuel and air mixture more time to atomize before entering the cylinder????:-/

 

[phragle]

I believe Bell's book is available online.

 

[brandoz28]

as a matter of fact it is....i haven't read all the way through yet....not a casual read
http://www.kreidler.nl/artikelen/performance-tuning-graham-bell/performance-tuning-graham-bell.pdf

 

[brandoz28]

as a matter of fact it is....i haven't read all the way through yet....not a casual read
http://www.kreidler.nl/artikelen/performance-tuning-graham-bell/performance-tuning-graham-bell.pdf