Red light on????

[motofreak195]

Alright, my red light was on so i figured an oil change would help.

I put Castrol Synthetic 10W-40 in it....

The sight glass is full....and the red light is still on.

Any other reasons that light is on?

And this is my first 2stroke and it ticks at idle, Is this normal? I know with a 4stroke it is bad....

and i bought FormulaK2 to put in mny resevoir, and i didnt notice it was premix only until i got home.....is this safe to use?

 

[01blasterdude]

didn't you already post a thread about this?

 

[01blasterdude]

Is your oil tank under the seat full? Also do you know if the oil injection is still intact? That oil light is for the oil that mixes with the gas (from under the seat) If it is on, until you figure out why, dont run it, only long enough to see if its still on when you tried to fix something or added oil. If you are running without oil, you will fry the top end.

 

[motofreak195]

nope.....

I posted a similar thread and asked what oils everyone suggested

 

[motofreak195]

I'm calling the guy i bought it from to ask if the oil injection is blocked off

 

[motofreak195]

I just called him and he said that light has always just randomly came on and when off from time to time....

 

[motofreak195]

and the resevoir tank is a little less than 1/2 full

 

[01blasterdude]

When you pull the cap off of the tank, you will see the sensor that turns the light on if its low. Make sure it has good connections everywere, because if you run oil injection, that light is pretty important to save your motor, when you get riding, and forget to check then the motor locks up and then you notice, "ahh crap my oil ran out!!" Lots of people choose to premix their gas.

If you are going to keep the injection on, I have my whole tank, sensor, light, pump, etc. Anything that would need to fix it. PM if interested.

 

[motofreak195]

I filled my resivoir tank up and the light went off...

so good to go for now!

 

[01blasterdude]

LOL... thats what the lights for.

 

[Darrell]

I filled my resivoir tank up and the light went off...

so good to go for now!

lol, your smart dude! just messin with ya:-D

 

[nightmare420]

my oil light doesnt even turn on when i run out of oil. both wires are connected so im guessing its the sensor?

 

[01blasterdude]

or maybe the bulbs burned out, or bad connection up front to the bulb. If you find you need a part for it, let me know, I dont need mine anymore.

 

[nightmare420]

or maybe the bulbs burned out, or bad connection up front to the bulb. If you find you need a part for it, let me know, I dont need mine anymore.

iight thanx man

 

[97blasterguy1]

When you pull the cap off of the tank, you will see the sensor that turns the light on if its low. Make sure it has good connections everywere, because if you run oil injection, that light is pretty important to save your motor, when you get riding, and forget to check then the motor locks up and then you notice, "ahh crap my oil ran out!!" Lots of people choose to premix their gas.

If you are going to keep the injection on, I have my whole tank, sensor, light, pump, etc. Anything that would need to fix it. PM if interested.

How much do you want for the injection set up if you still have it?

 

[Awk08]

How much do you want for the injection set up if you still have it?

the last post in this thread is from 2008, doubt those guys are even still on here.
post a want ad in the marketplace if you need parts

 

[97blasterguy1]

I just sgined up on here trying to learn how to work everything lol just figured id give it a shot you know

 

[Awk08]

I just sgined up on here trying to learn how to work everything lol just figured id give it a shot you know

it's all good, welcome to BF.
ask away, we're here to help you

 

[97blasterguy1]

it's all good, welcome to BF.
ask away, we're here to help you

Thank you and im starting to get the hang of it lol

 

[RicanBoyJun]

I've got a Yamaha blaster and I can't tell if my oil is to low for me to ride